Name: AAA/AA Multi- Charger BTY-825
SKU: 1217543

Product Features:

BTY-825 product specifications

This specification describes the "BTY-N 825" electric battery chargers , appearance and mechanical properties as well as the external environment requirements, etc.

Specifications.

Second, product characteristics

1, the charger can charge four AA / AAA NiMH or NiCd rechargeable batteries , LED charging indicator ;

2 , constant trickle charge mode , timing shutdown mode , will increase battery life ;

3, AA / AAA rechargeable battery with two batteries in series mode , Time control , to ensure safe use ;

4, all voltage inputs , globally applicable .

Third, the electrical parameters

1. Input : 100-240V AC, 50 / 60Hz 80mA;

2. Output : AA / AAA 2.4VDC * 2 200mA;

3 , no-load power consumption : 1W MAX;

4 , loaded with power : 5W MAX;

5 , Battery charge rate : ≥80%;

Fourth, environmental conditions

1. Environment: Temperature : 0-35 degrees Humidity : ≤95%

2 , the storage environment: Temperature : -25 ~ 60 degrees Humidity : ≤85%

3 , work the body temperature : charging shell surface temperature ≤60 degrees, the battery surface temperature ≤55 degrees.

Fifth, security specifications

Compliance with safety standards:

Six , the mechanical properties

1. High temperature test : test temperature of 65 degrees ± 2 degrees, the product is not packaged , duration of 5 hours . Place to be restored at room temperature

After the re- re-test its appearance , dielectric strength, indicating functional and electrical properties. The skin should be smooth and no scratches, burrs to

And other mechanical damage , exposed metal parts should not have rust ; no breakdown , flashover ; indicator and electrical properties of normal

2. Low temperature test: test temperature of -20 degrees ± 3 degrees, the product is not packing a duration of eight hours . Place to be at room temperature

After the restoration re-test its appearance , dielectric strength, indicating functional and electrical properties. The skin should be smooth and no scratches , burrs And other mechanical damage , exposed metal parts should not have rust ; no breakdown , flashover ; indicator and electrical properties are

Often

3. Damp heat test : the experimental temperature of 40 degrees ± 2 degrees, humidity of 90 % to 95% , the product is not packing a duration of 48

Hours. Re- testing of its appearance, dielectric strength, indicating functional and electrical properties after the test . The skin should be smooth and free of cuts Marks, burrs and other mechanical damage , exposed metal parts should not have rust ; no breakdown , flashover ; indicator and

Electric normal performance.

The vibration test : frequencies of 10 ~ 55HZ, amplitude of 0.35mm, each direction sweep cycles 10 times . Experiment After re- testing of its appearance, dielectric strength, indicating functional and electrical properties. Seamless appearance should be smooth , burr and its It is mechanical damage , exposed metal parts should not have rust ; no breakdown , flashover ; indicator and electrical properties of normal

5. Drop test: the height of 1000mm, 20mm thick bench of hard wood, six surface , once in each direction .

Experiments were retested after its appearance , dielectric strength, indicating functional and electrical properties. The skin should be smooth and no scratches, hairs Thorns and other mechanical damage , exposed metal parts should not have rust ; no breakdown , flashover ; indicator and electrical properties Normal .

6. charger endurance test : battery plug 3000 , combined with surface electrodes without deformation and charging performance unchanged.

7. charging electrode strength test : normal load batteries , flip -free weight loss.

8. The high-pressure test : P-S 2000V AC test when 5mA 60S no breakdown , flashover , fully functional .

9. Insulation resistance : Input for input and output, under 500VDC minimum 100M ohms.

Seven , instructions for use

1. Insert the battery , and the battery charger /- poles corresponding /- terminals of the battery compartment , otherwise the battery will not be charged ;

2, power charger starts charging the battery , the charging indicator light, as light is not lit, check the battery is installed correctly.

3 , the timer starts counting after power , charging time off after the charge current , charge indicator quench .

Eight Notes

z new rechargeable battery after 2-3 times in order to achieve optimal performance.

z rechargeable batteries store more than a week , part of the power will automatically drain , it should be recharged before use .

When charging the battery issue z fever is a normal phenomenon , until the battery is fully charged , the temperature will gradually returned to normal room temperature .

z To achieve the best charging results , please put the charger in indoor environments using air circulation .

z Children must use the charger under adult supervision ;

z must use the charger within the temperature range of 0 degrees -35 degrees ;

z properly installed battery , prevent reverse .

Turn off the external power charger stops charging when z .

Nine , warnings

z limited to AA / AAA of Ni-MH / Ni-Cd rechargeable battery , if other types of batteries may be charged

Cause an explosion , cracking or leakage , personal injury or property damage ;

z If the proper use of the charger may cause electric shock ;

z The charger is for indoor use , moisture heat ;

z Do not disassemble, assemble the charger or used for other purposes ;

z Keep out of the reach of children in a safe place .